Hydroscopic and Heat Releasing Finishing Agent TexTrit HOT
Hydroscopic and Heat Releasing Finishing Agent TexTrit HOT
1
Zhejiang Holposon New Material Co., Ltd, HOLPOSON for short, was founded in 2017 by a young doctor returning from Canada.
HOLPOSON is a comprehensive technical professional organization integrating functional additive technology research and development, techical services, technical applications, and technical sales.
Three series of new textile finishing agents, PreTrit, ColTrit, and TexTrit, have been developed in the pretreatment, dyeing and after-finishing processes, which have been widely used in textile printing and dyeing processing enterprises.
Thermal storage to keep warm
Hydroscopic and Heat Releasing
BQE A 035 GB/T 29866 FZ/T 73036
Environmentally friendly
Physical & chemical properties:
Composition: Special polyacrylic acid, etc.
Appearance: Yellowish transparent weak viscous liquid
Ionicity: Weak cationic
Solubility: Soluble in water
P H： 5～6
Attentions:
Before using the product, please confirm whether the fabric is treated with hydrophobic softener. It is recommended to add hydrophilic softener.
The prepared working solution should be used within the same day.
Testing standard
The following testing standards are supported:
BQE A 035
GB/T 29866
FZ/T 73036
Usage:
Dosage: Depends on different types of materials to be treated. Generally 6.0-10.0% (o.w.f.)
1. Padding method
Dosage: HOT 80-130g/LTreatment method: Dip and roll twice, with liquid rate of about 80%, drying and heat setting above 120 ℃
2. Impregnation method (applicable to cotton and viscose)
Dosage: 6-10% (o.w.f.)Dissolv evenly to prepare the solution → impregnation (20 minutes) → dehydration (about 50% of liquid content) → drying (80 ℃) → heat setting (120 ℃, 1-2 minutes)3. Melt spinning method
Prepare the solution according to the actual situation and technical suggestions.
Storage:
Storage time: 12 months
Keep indoor and avoid overheat or severe cold
The optional packages are：1kg/2kg/5kg/10kg/25kg/60kg/100kg/120kg
Thermal storage to keep warm
Hydroscopic and Heat Releasing
BQE A 035 GB/T 29866 FZ/T 73036
Environmentally friendly
Physical & chemical properties:
Composition: Special polyacrylic acid, etc.
Appearance: Yellowish transparent weak viscous liquid
Ionicity: Weak cationic
Solubility: Soluble in water
P H： 5～6
Attentions:
Before using the product, please confirm whether the fabric is treated with hydrophobic softener. It is recommended to add hydrophilic softener.
The prepared working solution should be used within the same day.
Testing standard
The following testing standards are supported:
BQE A 035
GB/T 29866
FZ/T 73036
Usage:
Dosage: Depends on different types of materials to be treated. Generally 6.0-10.0% (o.w.f.)
1. Padding method
Dosage: HOT 80-130g/LTreatment method: Dip and roll twice, with liquid rate of about 80%, drying and heat setting above 120 ℃
2. Impregnation method (applicable to cotton and viscose)
Dosage: 6-10% (o.w.f.)Dissolv evenly to prepare the solution → impregnation (20 minutes) → dehydration (about 50% of liquid content) → drying (80 ℃) → heat setting (120 ℃, 1-2 minutes)3. Melt spinning method
Prepare the solution according to the actual situation and technical suggestions.
Storage:
Storage time: 12 months
Keep indoor and avoid overheat or severe cold
The optional packages are：1kg/2kg/5kg/10kg/25kg/60kg/100kg/120kg
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
