Anti-bacterial and Mildew-Proof Finishing Agent TexTrit Captain AM
Anti-bacterial and Mildew-Proof Finishing Agent TexTrit Captain AM
1
Zhejiang Holposon New Material Co., Ltd, HOLPOSON for short, was founded in 2017 by a young doctor returning from Canada.
HOLPOSON is a comprehensive technical professional organization integrating functional additive technology research and development, techical services, technical applications, and technical sales.
Three series of new textile finishing agents, PreTrit, ColTrit, and TexTrit, have been developed in the pretreatment, dyeing and after-finishing processes, which have been widely used in textile printing and dyeing processing enterprises.
Suitable for most textile fibers
Anti-bacterial and Mildew-Proof Finishing
AATCC 147 JIS L1902 ISO 20645
Wide range of applications
Physical & chemical properties:
Appearance: Milky white to yellowish dispersion liquid
Ionicity: Weak anionic
Main contents: Organic quaternary ammonium salt
Solubility: Dispersable and soluble in water
Attentions:
1. Dissolving the product with cold water or warm water (about 30 ~ 40 ℃) can ensure good processing stability and antibacterial effect of the product.
2. If some auxiliaries such as fiber matting agent are used, the finishing effect will be reduced. Or if the structure of the fabric is too loose, the antibacterial test result will also be affected.
3. In order to guarantee the overall the effect, we suggest to test in advance. The overall effect mainly depends on the fabric type.
Testing standard
The following testing standards are supported:
AATCC 147 / JIS L 1902/ ISO 20645
GB T 20944.1/ GB T 20944.2/ GB T 20944.3
GB T 24346/ AATCC 30 / JIS Z 2911
Usage:
First, weigh and take the Captain AM, stir it while adding water, then dilute it to the required concentration, and carry out the production according to the following process:
1. Padding method
Captain AM 15-20g/L Crosslinker HFM 10g/L Softener SOFT 5g/LLiquid retention rate: 60-70% Process: Drying at 110 ℃ and heat setting at 150 ℃ for 60-90 seconds
2. Impregnation method
Captain AM 1-2% Crosslinker HFM 1% Process: Bath ratio: 1:10Treatment condition: Impregnation at 20 ℃ for 20-30 minutes, dehydration (with liquid rate of 60-100%), drying.
3. Spraying method
Prepare a solution of 50-60g/L (prepare the required concentration according to the actual situation), spray it on the surface of the material to be treated, and dry it naturally or dry it with heat.
Storage:
Store in a cool, dry and ventilated place. The storage time is 1 year minimum. Use up as soon as possible after opening. If it is not used up, please cover it tightly to prevent the product from moisture or foreign matters.
The optional packages are：1kg/2kg/5kg/10kg/25kg/60kg/100kg/120kg
Suitable for most textile fibers
Anti-bacterial and Mildew-Proof Finishing
AATCC 147 JIS L1902 ISO 20645
Wide range of applications
Physical & chemical properties:
Appearance: Milky white to yellowish dispersion liquid
Ionicity: Weak anionic
Main contents: Organic quaternary ammonium salt
Solubility: Dispersable and soluble in water
Attentions:
1. Dissolving the product with cold water or warm water (about 30 ~ 40 ℃) can ensure good processing stability and antibacterial effect of the product.
2. If some auxiliaries such as fiber matting agent are used, the finishing effect will be reduced. Or if the structure of the fabric is too loose, the antibacterial test result will also be affected.
3. In order to guarantee the overall the effect, we suggest to test in advance. The overall effect mainly depends on the fabric type.
Testing standard
The following testing standards are supported:
AATCC 147 / JIS L 1902/ ISO 20645
GB T 20944.1/ GB T 20944.2/ GB T 20944.3
GB T 24346/ AATCC 30 / JIS Z 2911
Usage:
First, weigh and take the Captain AM, stir it while adding water, then dilute it to the required concentration, and carry out the production according to the following process:
1. Padding method
Captain AM 15-20g/L Crosslinker HFM 10g/L Softener SOFT 5g/LLiquid retention rate: 60-70% Process: Drying at 110 ℃ and heat setting at 150 ℃ for 60-90 seconds
2. Impregnation method
Captain AM 1-2% Crosslinker HFM 1% Process: Bath ratio: 1:10Treatment condition: Impregnation at 20 ℃ for 20-30 minutes, dehydration (with liquid rate of 60-100%), drying.
3. Spraying method
Prepare a solution of 50-60g/L (prepare the required concentration according to the actual situation), spray it on the surface of the material to be treated, and dry it naturally or dry it with heat.
Storage:
Store in a cool, dry and ventilated place. The storage time is 1 year minimum. Use up as soon as possible after opening. If it is not used up, please cover it tightly to prevent the product from moisture or foreign matters.
The optional packages are：1kg/2kg/5kg/10kg/25kg/60kg/100kg/120kg
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
