Hydroscopic and Heat Releasing Finishing Agent HOT-TH
Hydroscopic and Heat Releasing Finishing Agent HOT-TH
1
Zhejiang Holposon New Material Co., Ltd, HOLPOSON for short, was founded in 2017 by a young doctor returning from Canada.
HOLPOSON is a comprehensive technical professional organization integrating functional additive technology research and development, techical services, technical applications, and technical sales.
Three series of new textile finishing agents, PreTrit, ColTrit, and TexTrit, have been developed in the pretreatment, dyeing and after-finishing processes, which have been widely used in textile printing and dyeing processing enterprises.
Heat storage and warmth preservation
Hydroscopic and Heat Releasing
BQE A 035 GB/T 29866 FZ/T 73036
Condensation heat
Physical & chemical properties:
Composition: Special polyacrylic acid, etc.
Appearance: Yellowish transparent weak viscous liquid
Ionicity: Weak cationic
Solubility: Soluble in water
P H ： 5～6
Characteristics:
HOT-TH is suitable for finishing cotton, viscose, polyester, acrylic and other fibers. Its working principle is as follows: The product treated on the fabric make the water vapor or sweat vapor around the fabric condense into water drops. And the condensation heat produced makes the human body feel warm, so as to achieve the function of heat storage and warmth preservation.
Testing standard
The following testing standards are supported:
BQE A 035 GB/T 29866 FZ/T 73036
Usage:
Dosage: Depends on different types of materials to be treated. Generally 1-3% (o.w.f.)
1. Padding method
Treatment method: Dip and roll twice, with liquid rate of about 80%, drying and heat setting above 120 ℃
2. Impregnation method (applicable to cotton and viscose)
Dissolv evenly to prepare the solution → impregnation (20 minutes) → dehydration (about 50% of liquid content) → drying (80 ℃) → heat setting (120 ℃, 1-2 minutes)
3. Melt spinning method
Storage:
Keep indoor and avoid overheat or severe cold
The optional packages are: 1kg/2kg/5kg/10kg/25kg/60kg/100kg/120kg
Heat storage and warmth preservation
Hydroscopic and Heat Releasing
BQE A 035 GB/T 29866 FZ/T 73036
Condensation heat
Physical & chemical properties:
Composition: Special polyacrylic acid, etc.
Appearance: Yellowish transparent weak viscous liquid
Ionicity: Weak cationic
Solubility: Soluble in water
P H ： 5～6
Characteristics:
HOT-TH is suitable for finishing cotton, viscose, polyester, acrylic and other fibers. Its working principle is as follows: The product treated on the fabric make the water vapor or sweat vapor around the fabric condense into water drops. And the condensation heat produced makes the human body feel warm, so as to achieve the function of heat storage and warmth preservation.
Testing standard
The following testing standards are supported:
BQE A 035 GB/T 29866 FZ/T 73036
Usage:
Dosage: Depends on different types of materials to be treated. Generally 1-3% (o.w.f.)
1. Padding method
Treatment method: Dip and roll twice, with liquid rate of about 80%, drying and heat setting above 120 ℃
2. Impregnation method (applicable to cotton and viscose)
Dissolv evenly to prepare the solution → impregnation (20 minutes) → dehydration (about 50% of liquid content) → drying (80 ℃) → heat setting (120 ℃, 1-2 minutes)
3. Melt spinning method
Storage:
Keep indoor and avoid overheat or severe cold
The optional packages are: 1kg/2kg/5kg/10kg/25kg/60kg/100kg/120kg
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
