Color Fastness to Wet Friction Promoter for Reactive Dyes TexTrit GS
Color Fastness to Wet Friction Promoter for Reactive Dyes TexTrit GS
1
Zhejiang Holposon New Material Co., Ltd, HOLPOSON for short, was founded in 2017 by a young doctor returning from Canada.
HOLPOSON is a comprehensive technical professional organization integrating functional additive technology research and development, techical services, technical applications, and technical sales.
Three series of new textile finishing agents, PreTrit, ColTrit, and TexTrit, have been developed in the pretreatment, dyeing and after-finishing processes, which have been widely used in textile printing and dyeing processing enterprises.
Good stability
Color Fastness to Wet Friction Promoter for Reactive Dyes
Especially suitable for black and bright red
Physical & chemical properties:
Appearance: light yellow liquid
Ionicity: weak cationic
pH: acidic
Solubility: easily dilutable in cold water
Characteristics:
1. Significantly improves the color fastness to wet friction of materials dyed with reactive, direct, sulfurized and reduced dyes.
2. It hardly affects the luster and hand feeling of the dyed material.
3. It has good stability and is suitable for impregnation treatment of knitted fabric and finished garment.
Attentions:
Please control the concentration of the solution below 30g/L, dilute it with cold water with a temperature of no more than 35 ℃.
Before treatment, the material must be fully washed to remove flooding, and adjust by neutralization the pH value of fabric surface to neutral - weak acidic.
Due to different dyeing equipment, the operation stability will be affected by possible shortage of working solution in the process, so it is necessary to ensure the product stability through preliminary tests before use.
This product is weak cationic, and its stability will be affected by factors like hardness of water used in dyeing, metal ions, acids, alkalis, salts, etc. Please do confirm the product’s compatibility with other agents used in the same bath through sample tests.
Usage:
1. Padding
TexTrit GS 20~30g/L
Dispersing chelator: 0.5g/L (for stability)
Acetic acid adjustment: pH = 5
Processing method: Dip and roll (liquid content: 70%), bake at 150℃ for 60 - 90 seconds after drying
2. Impregnation process
TexTrit GS 2~5g/L
Processing method: Impregnate at 30-40℃ for 5-10 minutes, dehydrate and dry.
Storage:
Keep indoor and avoid overheat or severe cold
The optional packages are: 1kg/2kg/5kg/10kg/25kg/60kg/100kg/120kg
Good stability
Color Fastness to Wet Friction Promoter for Reactive Dyes
Especially suitable for black and bright red
Physical & chemical properties:
Appearance: light yellow liquid
Ionicity: weak cationic
pH: acidic
Solubility: easily dilutable in cold water
Characteristics:
1. Significantly improves the color fastness to wet friction of materials dyed with reactive, direct, sulfurized and reduced dyes.
2. It hardly affects the luster and hand feeling of the dyed material.
3. It has good stability and is suitable for impregnation treatment of knitted fabric and finished garment.
Attentions:
Please control the concentration of the solution below 30g/L, dilute it with cold water with a temperature of no more than 35 ℃.
Before treatment, the material must be fully washed to remove flooding, and adjust by neutralization the pH value of fabric surface to neutral - weak acidic.
Due to different dyeing equipment, the operation stability will be affected by possible shortage of working solution in the process, so it is necessary to ensure the product stability through preliminary tests before use.
This product is weak cationic, and its stability will be affected by factors like hardness of water used in dyeing, metal ions, acids, alkalis, salts, etc. Please do confirm the product’s compatibility with other agents used in the same bath through sample tests.
Usage:
1. Padding
TexTrit GS 20~30g/L
Dispersing chelator: 0.5g/L (for stability)
Acetic acid adjustment: pH = 5
Processing method: Dip and roll (liquid content: 70%), bake at 150℃ for 60 - 90 seconds after drying
2. Impregnation process
TexTrit GS 2~5g/L
Processing method: Impregnate at 30-40℃ for 5-10 minutes, dehydrate and dry.
Storage:
Keep indoor and avoid overheat or severe cold
The optional packages are: 1kg/2kg/5kg/10kg/25kg/60kg/100kg/120kg
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
